Mecklenburg County, NC

Metal Roofing in Charlotte, NC

Metal Roof NC, an authorized Interlock aluminum roofing dealer based in Raleigh, installs Interlock aluminum and standing seam metal roofs for Charlotte homeowners. Below: the storms Charlotte roofs have faced, how Mecklenburg County permits work, and what to decide before you ask for an estimate.

Request an estimate (984) 289-2585

Who Installs Metal Roofs in Charlotte?

Metal Roof NC installs Interlock aluminum roofs in Charlotte as an authorized Interlock dealer, along with standing seam metal roofs and asphalt-shingle replacement. Interlock Roofing manufactures the panels; Metal Roof NC handles the estimate, the permit and the installation.

Can a Hurricane Really Damage a Charlotte Roof?

It already has. Hurricane Hugo came ashore near Charleston around midnight on September 22, 1989, and its center passed just west of Charlotte about six hours later. The State Climate Office records an 87 mph gust at the airport's 20-foot anemometer and 99 mph at the FAA control tower, tens of thousands of trees flattened across the region, and a combined 876,000 outages across the Carolinas, some lasting weeks. In September 2024, Helene's remnants brought a 57-knot gust (about 66 mph) to Charlotte Douglas International, and NWS Greenville-Spartanburg reported trees and power lines down across its forecast area.

What Does That Mean for the Roof Itself?

Wind damage to shingle roofs usually starts at an edge or a tab. Interlock panels lock together on all four sides and are fastened through concealed flanges, and the system's warranted wind resistance is 120 mph when installed to manufacturer specification. Falling trees are a separate risk that no roof prevents, so trimming overhanging limbs is still worth doing.

How Hot Are Charlotte Summers?

NOAA's 1991-2020 normals for Charlotte Douglas put the July average high at 90.3°F and the June-August average high at 88.6°F, with 43.60 inches of precipitation a year. That heat ages asphalt shingles and drives attic temperatures. Interlock's Alunar colors are CRRC-rated, so you can compare solar reflectance between colors before you pick one.

What Do Charlotte Homes Typically Look Like?

Charlotte had 874,579 residents in the 2020 Census, with about 51.0% of homes owner-occupied, per Census QuickFacts. Much of the housing is suburban, built in subdivisions with homeowners associations, so HOA architectural approval for color and profile is a common first step. Slate and cedar-shake profiles may be easier to get through guidelines written around traditional roof looks. Charlotte also has local historic districts with their own design review; if your house is in one, ask about review before you sign anything.

Who Issues Roof Permits in Charlotte?

Mecklenburg County Code Enforcement issues building permits. Its permitting page notes that residential work costing $40,000 or less may not need a permit unless it falls into a listed category, including the addition of roofing other than replacement with like-grade material. That mirrors state law in G.S. 160D-1110. Your installer should confirm whether your job needs one and pull it if so.

How Does the Estimate Work?

Metal Roof NC gives a project-specific estimate before work begins, based on roof size, pitch, tear-off and deck condition. Tear-off is required over cedar, tile or natural slate; one layer of asphalt can stay only if inspection finds it suitable and the code allows it. Financing is available through Service Finance for qualified homeowners, subject to lender approval.

Which Interlock Profile Suits a Charlotte House?

If your house has asphalt shingles now, Interlock's slate, cedar shingle and shake profiles keep a similar textured look, while Mediterranean tile suits stucco and Spanish-style homes and standing seam suits modern designs and low-slope additions. The aluminum panels weigh roughly 0.4 to 0.7 pounds per square foot, far lighter than concrete tile or natural slate. The ICC-ES evaluation report ESR-1790 covers Interlock's shingle, slate, shake and tile profiles, which gives a plan reviewer a code-compliance document to check. Standing seam is not covered by that report and is evaluated separately, so ask how it will be documented for your permit.

Also serving near Charlotte

Matthews, Mint Hill, Pineville, Huntersville, Cornelius, Davidson

Questions about metal roofing in Charlotte

Who installs metal roofs in Charlotte, NC?

Metal Roof NC, an authorized Interlock aluminum roofing dealer, installs Interlock aluminum and standing seam metal roofs for Charlotte homeowners.

What was the strongest wind gust in Charlotte during Hurricane Hugo?

The State Climate Office records 87 mph at the airport's 20-foot anemometer and 99 mph at the FAA control tower on September 22, 1989.

Who issues roofing permits in Charlotte?

Mecklenburg County Code Enforcement issues building permits for residential work in Charlotte.

What wind rating does an Interlock roof have?

Interlock's warranted wind resistance is 120 mph when installed to manufacturer specification.